Over-expression of Ultrabithorax alters embryonic body plan and wing patterns in the butterfly Bicyclus anynana

In insects, forewings and hindwings usually have different shapes, sizes, and color patterns. A variety of RNAi experiments across insect species have shown that the hox gene Ultrabithorax (Ubx) is necessary to promote hindwing identity. However, it remains unclear whether Ubx is sufficient to confer hindwing fate to forewings across insects. Here, we address this question by over-expressing Ubx in the butterfly Bicyclus anynana using a heat-shock promoter. Ubx whole-body over-expression during embryonic and larvae development led to body plan changes in larvae but to mere quantitative changes to adult morphology, respectively. Embryonic heat-shocks led to fused segments, loss of thoracic and abdominal limbs, and transformation of head limbs to larger appendages. Larval heat-shocks led to reduced eyespot size in the expected homeotic direction, but neither additional eyespots nor wing shape changes were observed in forewings as expected of a homeotic transformation. Interestingly, Ubx was found to be expressed in a novel, non-characteristic domain – in the hindwing eyespot centers. Furthermore, ectopic expression of Ubx on the pupal wing activated the eyespot-associated genes spalt and Distal-less, known to be directly repressed by Ubx in the fly?s haltere and leg primordia, respectively, and led to the differentiation of black wing scales. These results suggest that Ubx has been co-opted into a novel eyespot gene regulatory network, and that it is capable of activating black pigmentation in butterflies.     

Phenotypic and genetic relationships between growth and feed intake curves and feed efficiency and amino acid requirements in the growing pig

Improvement of feed efficiency in pigs has been achieved essentially by increasing lean growth rate, which resulted in lower feed intake (FI). The objective was to evaluate the impact of strategies for improving feed efficiency on the dynamics of FI and growth in growing pigs to revisit nutrient recommendations and strategies for feed efficiency improvement. In 2010, three BWs, at 35±2, 63±9 and 107±7 kg, and daily FI during this period were recorded in three French test stations on 379 Large White and 327 French Landrace from maternal pig populations and 215 Large White from a sire population. Individual growth and FI model parameters were obtained with the InraPorc^R software and individual nutrient requirements were computed. The model parameters were explored according to feed efficiency as measured by residual feed intake (RFI) or feed conversion ratio (FCR). Animals were separated in groups of better feed efficiency (RFI⁻ or FCR⁻), medium feed efficiency and poor feed efficiency. Second, genetic relationships between feed efficiency and model parameters were estimated. Despite similar average daily gains (ADG) during the test for all RFI groups, RFI⁻ pigs had a lower initial growth rate and a higher final growth rate compared with other pigs. The same initial growth rate was found for all FCR groups, but FCR⁻ pigs had significantly higher final growth rates than other pigs, resulting in significantly different ADG. Dynamic of FI also differed between RFI or FCR groups. The calculated digestible lysine requirements, expressed in g/MJ net energy (NE), showed the same trends for RFI or FCR groups: the average requirements for the 25% most efficient animals were 13% higher than that of the 25% least efficient animals during the whole test, reaching 0.90 to 0.95 g/MJ NE at the beginning of the test, which is slightly greater than usual feed recommendations for growing pigs. Model parameters were moderately heritable (0.30±0.13 to 0.56±0.13), except for the precocity of growth (0.06±0.08). The parameter representing the quantity of feed at 50 kg BW showed a relatively high genetic correlation with RFI (0.49±0.14), and average protein deposition between 35 and 110 kg had the highest correlation with FCR (−0.76±0.08). Thus, growth and FI dynamics may be envisaged as breeding tools to improve feed efficiency. Furthermore, improvement of feed efficiency should be envisaged jointly with new feeding strategies.     

The impact of hybrids between genetically modified crop plants and their related species: general considerations

Factors influencing the fate and impact of hybrids between crop plants and their related species operate from the early zygote, through to plant establishment in different habitats, to their ability to form self-sustaining populations. Many of the classes of genes being introduced by modern methods of genetic modification are similar to those manipulated by conventional plant breeding. In assessing the impact of transgenes in hybrids between crops and related species, therefore, it is important to be informed about the consequences of hybridization between conventionally bred varieties and their relatives. Some transgenes will have novel effects (e.g. production of pharmaceutical substances or certain fatty acids) on plants, and are likely to need specific assessment studies to determine their impact on hybrids. This will be particularly important if there is the possibility of these transgenes becoming established in wild populations. Some recommendations for further research are outlined.     

Relative efficiency of unequal versus equal cluster sizes in cluster randomized trials using generalized estimating equation models

There is growing interest in conducting cluster randomized trials (CRTs). For simplicity in sample size calculation, the cluster sizes are assumed to be identical across all clusters. However, equal cluster sizes are not guaranteed in practice. Therefore, the relative efficiency (RE) of unequal versus equal cluster sizes has been investigated when testing the treatment effect. One of the most important approaches to analyze a set of correlated data is the generalized estimating equation (GEE) proposed by Liang and Zeger, in which the “working correlation structure” is introduced and the association pattern depends on a vector of association parameters denoted by ρ. In this paper, we utilize GEE models to test the treatment effect in a two‐group comparison for continuous, binary, or count data in CRTs. The variances of the estimator of the treatment effect are derived for the different types of outcome. RE is defined as the ratio of variance of the estimator of the treatment effect for equal to unequal cluster sizes. We discuss a commonly used structure in CRTs—exchangeable, and derive the simpler formula of RE with continuous, binary, and count outcomes. Finally, REs are investigated for several scenarios of cluster size distributions through simulation studies. We propose an adjusted sample size due to efficiency loss. Additionally, we also propose an optimal sample size estimation based on the GEE models under a fixed budget for known and unknown association parameter (ρ) in the working correlation structure within the cluster.     

Control of water-use efficiency by florigen

A major issue in modern agriculture is water loss through stomata during photosynthetic carbon assimilation. In water-limited ecosystems, annual plants have strategies to synchronize their growth and reproduction to the availability of water. Some species or ecotypes of flowers are early to ensure that their life cycles are completed before the onset of late season terminal drought (“drought escape”). This accelerated flowering correlates with low water-use efficiency (WUE). The molecular players and physiological mechanisms involved in this coordination are not fully understood. We analyzed WUE using gravimetry, gas exchange, and carbon isotope discrimination in florigen deficient (sft mutant), wild-type (Micro-Tom), and florigen over-expressing (SFT-ox) tomato lines. Increased florigen expression led to accelerated flowering time and reduced WUE. The low WUE of SFT-ox was driven by higher stomatal conductance and thinner leaf blades. This florigen-driven effect on WUE appears be independent of abscisic acid (ABA). Our results open a new avenue to increase WUE in crops in an ABA-independent manner. Manipulation of florigen levels could allow us to produce crops with a life cycle synchronized to water availability.     

Determining the economic value of daily dry matter intake and associated methane emissions in dairy cattle

Feed represents a substantial proportion of production costs in the dairy industry and is a useful target for improving overall system efficiency and sustainability. The objective of this study was to develop methodology to estimate the economic value for a feed efficiency trait and the associated methane production relevant to Canada. The approach quantifies the level of economic savings achieved by selecting animals that convert consumed feed into product while minimizing the feed energy used for inefficient metabolism, maintenance and digestion. We define a selection criterion trait called Feed Performance (FP) as a 1 kg increase in more efficiently used feed in a first parity lactating cow. The impact of a change in this trait on the total lifetime value of more efficiently used feed via correlated selection responses in other life stages is then quantified. The resulting improved conversion of feed was also applied to determine the resulting reduction in output of emissions (and their relative value based on a national emissions value) under an assumption of constant methane yield, where methane yield is defined as kg methane/kg dry matter intake (DMI). Overall, increasing the FP estimated breeding value by one unit (i.e. 1 kg of more efficiently converted DMI during the cow’s first lactation) translates to a total lifetime saving of 3.23 kg in DMI and 0.055 kg in methane with the economic values of CAD $0.82 and CAD $0.07, respectively. Therefore, the estimated total economic value for FP is CAD $0.89/unit. The proposed model is robust and could also be applied to determine the economic value for feed efficiency traits within a selection index in other production systems and countries.     

Regeneration of Triticum aestivum apical explants after microinjection of germ line progenitor cells with DNA

A highly efficient method of regenerating fertile, phenotypically normal plants from shoot apex cultures of T. aestivum was developed. The hypodermal layer (L2) of the vegetative apex containing germ line precursor cells could be located with bright field microscopy and targeted for microinjection. Fluorescently labelled dextrans were used as markers to develop a microinjection procedure which did not disrupt nuclear or cytoplasmic structure. This procedure was used to inject plasmid DNA into L2 cells. Capillary microinjection did not shear the plasmid DNA and delivery of DNA was confirmed by polymerase chain reaction analysis of DNA isolated from injected apices. The significance of these findings in relation to the development of cereal transformation systems will be discussed.     

Improvement of the transformation efficiency of Sacchaaromyces cerevisiae by altering carbon sources in pre-culture

We show here that the transformation efficiency of Saccharomyces cerevisiae is improved by altering carbon sources in media for pre-culturing cells prior to the transformation reactions. The transformation efficiency was increased up to sixfold by combination with existing transformation protocols. This method is widely applicable for yeast research since efficient transformation can be performed easily without changing any of the other procedures in the transformation.